Drysuit Repair Service

Available in 2 sizes and 2 leg fittings:
: 36cm leg circumference
: 42 cm circumference

Cone ankle seals are available in 2 leg circumference fittings, 36cm and 42cm.
we will measure and fit the correct size seal for your suit.

Boots (pair) - Chainsaw (Class 3 protection) also boots with side gussett extensions.
We undertake an alteration to the side of the boots to increase the circumference of the top of the boot. This then allows the wearer to get the chainsaw trousers worn underneath to drop into the top of the boots without scrunching at the top. Only available on repairs we undertake.

Neoprene diving boots. Solid rubber sole for comfort even when walking on rough terrain. Made in 5mm Armourtex neoprene, giving good thermal properies and the Armourtex face is hard wearing for a longer lasting boot..

These can be fitted into both neoprene and membrane drysuits.

Use extensivley through our diving range and fit them regularly to search and rescue suits as well as Jetkiing and safety boat use.

Sizes 5 - 12 are normally kept in stock for next day dispatch, wearas size 4 is a special order and can take a few weeks to deliver.

Gill Tall Yachting Boot 100% natural rubber compound boot with high levels of support and comfort. Non-slip razor cut soles make this ideal boot for on deck use. 100% natural rubber compound Non-slip razor cut soles for grip Quick drying polyester lining Removable ultra light cushioned inner soles with exceptional arch support Reinforced heel, instep and toe Padded tie top Coastal and Inshore Sailing.

S5 safety - Composite midsole and toe

Size: 4 - 13

Properties
• cut resistant
• ladder grip in sole for extra security
• wider fit
• extra high composite steel toe cap for optimal protection
• excellent grip, even on wet and greasy surfaces (SRC certified)
• easy on & off thanks to kick-off spur
• resistant to fats, manure and a variety of chemicals
• easy to clean and to disinfect
• PVC free
• RFID incl.

Concertina pocket 10" x 7' x 2" with full clear face map pocket to front, easy grip velcro closing flap.

Available in 4 sizes

Keep your knife attached to your suit correctly by having a knife pocket manufactured to fit your knife.

Send your knife to us with sheath to have one made.

flat top pocket with zip.

These 3D socks are designed to be fitted into drysuits with a lower leg circumference of around 42cm,  + / - 10%
2D socks are available for 36cm leg fittings.

These 2D socks are designed to be fitted into drysuits with a lower leg circumference of around 36cm,  + / - 10%. (narrow leg)

3D socks are available for 42cm leg fittings.

There are 2 materials that material socks can be made in 3 ply breathable and Non breathable tri-laminte. The breathable socks are to be used for lighter surface suits such as Sailing, Kayaking, Kite surfing etc.

The non-breathable polyester version is used for diving or where a more robust sock is required.

Available in UK sizes 3 - 13.  Both styles of socks should be sewn and taped into the suit and not glued.  For this reason, we recommend that we tackle this job for you.

High performance low profile auto dump valve suitable for all areas of recreational and technical diving.

Go with your flow and dive in comfort with the P-Valve from Apeks. Never again let your pre-dive hydration be a concern during your dry suit dive. With one of the fastest flow rates of any pee valve on the market, you can relax and enjoy the call of the wild while the Apeks P-Valve answers your call of nature.

Apeks swivel inflation valve, available in both Apeks and Seatec fittings.

Valve - Rubber Seat (Auto dump/inflation)

Valve - Rubber Seat (Wrist dump)

High performance valve suitable for all areas of recreational and technical diving.

The Si-Tech inflation valve is robust and reliable, featuring an extra-large recessed push-button allowing for easy operation with cold hands or thick gloves.

The simplest method of getting air out of a drysuit

Available in 2 weights

2mm for surface suits for sailing, kayaking, windsurfing, kiteboarding etc
3mm for Industrial suits for Lake and River maintenance, Fisheries, Search and Rescue etc

Made to order to your wrist circumference.

The standard weight are available in 4 sizes where as the heavy duty are only available in Med and large.   Bottle wrists give a greater contact area to the skin against the cone version so are good for faster impacts into water such as water-skiing, wakeboarding etc. They are also better at sealing against the skin if you have tendons that protrude away from your wrist.

Cone wrist seals are available in 3 sizes Small, Med & Large and also 2 weights, standard and heavy Duty,

These seals are designed to be trimmed out for a more comfortable fit. Only ever trim one ring off at a time. One ring will make a big difference.

One size only

This seal is longer than a standard seal at 240mm ( 9½").
Heavy duty at base (fitting end) going into standard weight latex around the wrist.

3mm neoprene in a bottle style with a longer contact area to skin, for divers.

Made to order to your wrist circumference.

AquaSeal zips are more flexible than their metal counterparts and are great for Dinghy sailors, Paddle boarders, kayakers and Kite surfers. We would recommend these for surface drysuits not diving drysuits.

Metal ProSeal zips also available in both standard (8bdm) and Heavy Duty (6bdm)

Standard Zips options and sizes.

Heavy Duty Zip options and sizes.